Pls help i have a adsl modem and i have line from service provider?
Q. Pls help i have a adsl modem and i have line from service provider but in modem its not showing the light what to do
Related posts:
3 Responses to “Pls help i have a adsl modem and i have line from service provider?”
Leave a Reply
Pls help i have a adsl modem and i have line from service provider?
Q. Pls help i have a adsl modem and i have line from service provider but in modem its not showing the light what to do
Related posts:
3 Responses to “Pls help i have a adsl modem and i have line from service provider?”
- tbshmkr -April 1, 2010 at 4:30 am
Connect Modem [wired] to Router [wireless] to PC.
=
* DO NOT REMOVE POWER TO RESET NETWORK DEVICES *
-
Set router POWER OFF.
-
Reset modem: With a straightened paperclip, press RESET button momentarily.
-
Wait 60 secs.
-
Set router POWER ON.
-
Reset router: With a straightened paperclip, press RESET button momentarily.
-
Wait 60 secs.
–
PC Command Line:
-
Click [Start] – Click [Run...] – enter: cmd, Click [OK]
-
At the prompt (c:…..>) enter: ipconfig /release, press [ENTER]
-
At the prompt (c:…..>) enter: ipconfig /renew, press [ENTER]
-
TEST: Open Web Browser: Connect to Internet.
–
If SUCCESS: Repeat Steps after PC Command Line on other PCs.
-
If NO SUCCESS:
-
At the prompt (c:…..>) enter: ipconfig /all, press [ENTER]
-
Ensure DHCP Enabled == YES
-
If IP Address == 0.0.0.0 OR 169.254.0.0 to 169.254.255.255, connect Modem [wired] to Router [wired] to PC and perform ALL steps again.
-
Leave a Reply
Pls help i have a adsl modem and i have line from service provider?
Q. Pls help i have a adsl modem and i have line from service provider but in modem its not showing the light what to do
Related posts:
3 Responses to “Pls help i have a adsl modem and i have line from service provider?”
- tbshmkr -April 1, 2010 at 4:20 am
Connect Modem [wired] to Router [wireless] to PC.
=
* DO NOT REMOVE POWER TO RESET NETWORK DEVICES *
-
Set router POWER OFF.
-
Reset modem: With a straightened paperclip, press RESET button momentarily.
-
Wait 60 secs.
-
Set router POWER ON.
-
Reset router: With a straightened paperclip, press RESET button momentarily.
-
Wait 60 secs.
–
PC Command Line:
-
Click [Start] – Click [Run...] – enter: cmd, Click [OK]
-
At the prompt (c:…..>) enter: ipconfig /release, press [ENTER]
-
At the prompt (c:…..>) enter: ipconfig /renew, press [ENTER]
-
TEST: Open Web Browser: Connect to Internet.
–
If SUCCESS: Repeat Steps after PC Command Line on other PCs.
-
If NO SUCCESS:
-
At the prompt (c:…..>) enter: ipconfig /all, press [ENTER]
-
Ensure DHCP Enabled == YES
-
If IP Address == 0.0.0.0 OR 169.254.0.0 to 169.254.255.255, connect Modem [wired] to Router [wired] to PC and perform ALL steps again.
-
You need to be sure the dsl modem’s driver has been loaded you might wish to try unplugging and replugging not only the power cord into the modem but also the modem comp connection too.
Hope that helps and best of luck.
Well are you sure that your UTP cable is not damaged? Also try to follow the instruction on how to set it up on it’s manual.
Connect Modem [wired] to Router [wireless] to PC.
=
* DO NOT REMOVE POWER TO RESET NETWORK DEVICES *
-
Set router POWER OFF.
-
Reset modem: With a straightened paperclip, press RESET button momentarily.
-
Wait 60 secs.
-
Set router POWER ON.
-
Reset router: With a straightened paperclip, press RESET button momentarily.
-
Wait 60 secs.
–
PC Command Line:
-
Click [Start] – Click [Run...] – enter: cmd, Click [OK]
-
At the prompt (c:…..>) enter: ipconfig /release, press [ENTER]
-
At the prompt (c:…..>) enter: ipconfig /renew, press [ENTER]
-
TEST: Open Web Browser: Connect to Internet.
–
If SUCCESS: Repeat Steps after PC Command Line on other PCs.
-
If NO SUCCESS:
-
At the prompt (c:…..>) enter: ipconfig /all, press [ENTER]
-
Ensure DHCP Enabled == YES
-
If IP Address == 0.0.0.0 OR 169.254.0.0 to 169.254.255.255, connect Modem [wired] to Router [wired] to PC and perform ALL steps again.
-